SEBA KLL-Q-2_Multifunctional Water Quality Measurements in Groundwater or Lakes

Model: Electric Contact Meter type KLL-Q-2

Manufacturer: SEBA Hydrometrie – Germany

Application: Water quality monitoring in ground and surface waters: groundwater monitoring points, wells, landfills, lakes, reservoirs

Quality Measurements with KLL-Q-2

The SEBA-KLL, type KLL-Q-2 is a unique mobile field laboratory for measurements of water quality at groundwater or surface
water measuring sites. Suitable for 50mm (2”) diameter wells. The instrument has an extremely compact design, easy operation with fast and precise acquisition of many water quality parameters. The current measured values are clearly displayed.


Optionally, the instrument can be equipped with an integrated data logger with a storage capacity of up to 1,120,000 values for an automatic or manual data recording. By default, the KLL-Q-2 is supplied with an accoustic signal device when the sensor touches the water surface. The new graduated round-cable with robust PE-covering (laserprinted, cm/dm/m) is fade proof and abrasion resistant.

 

Data Logger
Full data logger functionality (optional) is possible for the automatic storage of up to 1,120,000 measured values. Instant logs can be obtained manually at the push of a button, suitable for quick assimilation of water quality profiles.
Read-out and setting of measuring frequency via RS 232-interface with SEBA-HDA or laptop.

 

Software

Operating software: SEBAConfig
Data readout: Interfacekabel RS 232 – USB
Evaluation software: DEMASvis
Archiving Software: DEMASdb

 

Multiparameter Sensor

Double plug-in, maintenance-friendly high-quality-steel probe (MPS-D3, MPS-D8) or single plug-in plastic probe MPS-K16
for connection to Checker-2 or KLL-Q-2. Individually configurable with various sensors (e.g pH, O2, conductivity etc.) For
a detailed description of possible configurations refer to our
Water Quality Monitoring brochure.


Parameters:

  •          Water level
  •         Nitrate
  •         Temperature
  •         Ammonium
  •         Conductivity

                 –   Conductivity

                 –   Salinity

                 –   Salinity
  •         Sodium
  •         Calcium
  •         Fluoride
  •         Potassium
  •        Oxygen

                 –   Oxygen saturation
  •          Chlorophyll a
  •          Cyanobacteria
  •         pH-value
  •          Rhodamine WT
  •         Redox (ORP)
  •          Turbidity
    –   Total suspended solids(TSS)
  •         Redox (ORP)
                     
  •         Nitrate

 

 

Technical data KLL-Q-2

Sensor: Multiparameter probe MPS-D3 type
Multiparameter probe MPS-D8 type
Multiparameter probe MPS-K16 type
Housing:
Support frame: Aluminium
Cable drum: Shock-resistant plastic
Dimensions: Depending on cable length
Protection class: IP 54
Keyboard: 3 multifunction buttons
Display: 3-line backlit LCD
Cables:
Lengths: 30 m / 50 m / 80 m / 100 m/ 150 m / 200 m / 300 m / 400m
Material: PE jacket, printed with cm / dm / m scaling, food safe
Accuracy: < 1 cm at 100 m cable length
Dimensions: Ø 5 mm
Logger (option) Controller: 16 Bit Flash controller with integrated WatchDog RTC-IC Real Time Clock
Memory capacity: 16 MB (= 1,120.,00 readings)
Save interval: Manually or cycle-controlled by 2 min – 99 hours
Channels: Maximum 32
Measurement routines: Single value, average value, event clock, Delta mode
Communications
Interface:		 RS 232 (standard)
Operation: RS 485 (SHWP)
Power supply: 4 x 2 V lead-acid batteries, rechargeable
Connection: SEBA-plug system (stainless steel) for multiparameter probe of the MPS-D3/D8/K16 type

 

Technical data Sensors

Parameter:

 

 Measuring ranges:

 

 Parameter:

 

 Measuring ranges:

 
Pressure 0…200 mWs
Temperature: -5…50 °C		 Chloride 1…35000 mg/l
Temperature: 0…50 °C
Pressure: 0…200 mWs
Temperature -5…50 °C
Pressure: 0…500 mWs		 Ammonium 0.2…18000 mg/l
Temperature: 0…40 °C
Pressure: 0…10 mWs
Conductivity 0…200 mS
Temperature: -5…50 °C
Pressure: 0…500 mWs		 Ammonium 0.2…18000 mg/l
Temperature: 0…40 °C
Pressure: 0…10 mWs
Conductivity 0…200 mS
Temperature: -5…50 °C
Pressure: 0…500 mWs		 Calcium 0.5…40000 mg/l
Temperature: 0…40 °C
Pressure: 0…10 mWs
Salinity 0…70
Temperature: -5…50 °C
Pressure: 0…500 mWs		 Fluoride 0.2…20000 mg/l
Temperature: 0…40 °C
Pressure: 0…10 mWs
Density 988…1060 g/l
Temperature: -5…50 °C
Pressure: 0…500 mWs		 Potassium 0.4…39000 mg/l
Temperature: 0…40 °C
Pressure: 0…10 mWs
Oxygen
(amperometric)		 0-40 mg/l
Temperature: 0…50 °C
Pressure: 0…100 mWs		 Potassium 0.4…39000 mg/l
Temperature: 0…40 °C
Pressure: 0…10 mWs
Oxygen
(optical)		 0-25 mg/l
Temperature: 0…50 °C
Pressure: 0…100 mWs		 Cyanobacteria
(optical)		 150…2000000 cells/ml
Temperature: -2…50 °C
Pressure: 0…600 mWs
Oxygen saturation 0…400 % saturation
Temperature: 0…50 °C
Pressure: 0…100 mWs		 Cyanobacteria
(optical)		 150…2000000 cells/ml
Temperature: -2…50 °C
Pressure: 0…600 mWs
Oxygen saturation 0…400 % saturation
Temperature: 0…50 °C
Pressure: 0…100 mWs		 Cyanobacteria
(optical)		 150…2000000 cells/ml
Temperature: -2…50 °C
Pressure: 0…600 mWs
Oxygen saturation 0…400 % saturation
Temperature: 0…50 °C
Pressure: 0…100 mWs		 Cyanobacteria
(optical)		 150…2000000 cells/ml
Temperature: -2…50 °C
Pressure: 0…600 mWs
Ammonia 0,01…17000 mg/l
Temperature: 0…50 °C
Pressure: 0…5 mWs
Nitrate 0.4…60000 mg/l
Temperature: 0…40 °C
Pressure: 0…200 mWs

Related products

SEBA Electric Contact Meter type KLL _ Water Level Meter